Ordinary SS with rotary compressor and blue case

Hi

It's ordinary cased SS with rotary compressor . Nothing interesting , really . The simplest SS that can be done (+case) .Owner of this unit doesn't want anything fancy, he just want strong SS with case. So it's ...

Specs :

Compressor: LG NK185PAD rotary around 10000 BTU
Evap: Steeper 40mm tall/42 mm diam., enclosure for all newest CPUs, 1.0 meter braided DN10 suction line (with stainless steel mesh)
XV: captube 0.9 mm
Condensor: 1.9kW ROEN-EST + 254mm 230V fan
Refrigerant : R507
Case : Metal case, powdercoated on blue color
Others: LED temperature display, two 120x38mm NIDEC fans on back of case







I used case which I had been using for 3 days (those SS which was built in that case needs biger condensor, so this case was too small).





























This time I try to clean-up electic more . Sorry for funny descriptions in table , but I'm not electrician and I haven't got an idea how can I wrote that more professional ;-( .







I try new way of polishing also .







Unloaded during test in +25*C room.



Loaded by 260W dummyload, in +25*C room , after 2 hours test.









Best Regards
Peter

GOOD taff is a classical and nice SS

Nice work Piotres, as usual

I see you added a maitaining rod for the evaporator line
I would have also added something for the HP line before the condensor. To make those 3-4 copper loops to "deheat" and to absorb vibrations is good but there is a weight on the welding at compressor HP output. You know that transportation guys can be quite violent with their parcel...

But one SS like this should be more than enough to play with last babies from Intel and AMD

1/4' pipe is very light, it doesn't load HP port of compressor too much for sure.