Hello
I want to present SS in silver case 490x210x230mm with Danfoss NL11F compressor and R507 freon
. Nothing fancy, just cased and small SS
.
Specs (final) :
Compressor:
Danfoss NL11FEvap:
steeper 42mm diameter, braided DN10 suction flex hoseXV:
captube 0.8 mmCondensor:
Unseen BIG cube, with 120x38 mm Delta 12V plus 120x25 mm pushing fanRefrigerant :
R507Case :
Custom, metal case 49 x 21 x 23 cm, painted on metalic silverOthers:
Tt Thunderblade on the back of case (with LEDs removed), blue CCFLs inside case, sound insulation, Eliwell EM300 temperature display, plexi window in case.(look at posts on page no 2 to see final result)I want to check if suction hose lenght had been fine so I've fit LianLi case from vapoLS kit ..just for try .
In this point SS has been rebuilded - new suction line braided hose, bigger suction line accumulator and finaly 120x38mm DELTA on condensor (will be regulated in near future)
. I also resign from silver paint on tubes which doesn't look good for me ...
Till this time still with Tt Thunderblade but I've found that this fan isn't strong enounght to pull air thought such thick condensor .
Final look.
Tuning during night
.
Final :
No load - it's bit high becasue of "heavy" tunning
.
on 225W dummyload was -36C
thanks
best regards
peter