Hi
I want to show You mine latest cascade, it's 2 stager based on 2 rotary compressors, plate HX, Danfoss TS2 valve, Danfoss OUB1 oilseparator, some extras like four REFCO panel gauges or dixell controller and .... metal, BLACK case
. We like that kind of cases, do we ?
Specs :compressors:
two Sanyo C-1RV137H11AA rotariesevap:
steeper by piotres XV:
Danfoss TS2 / captube 0.8 mm HX:
plate HX , 12 platescondenser:
2 row, alu-cu, cooled by 4 x 120mm/12 V NBM fansrefrigerants :
R507/R1150oilseparator :
Danfoss OUB1safety :
cut-offcase :
metal case, 46 x 46 x 43 cm, black paintothers:
4*REFCO panel gauges, Dixell XR10C controller (turn on 2nd stage automatically when 1st stage is enought cold), homemade receiver before Danfoss TS2, big 230 mm/230V fan on the back wall of case Suction line is braided one, 18 mm thick insulation and red sleeve
.
Sorry for some dirty old insulation on compressors' accumulators .
Finally I've add shock absorber to 1st stage suction line (called "anaconda" here in Poland ) and add also second drier to 2nd stage .
Some first run digits.
Final charge, no load
.
And here loaded with 225W.
We have tested that cascade on E6700 till now, and we got around -98-99*C loaded, and -100-102*C idle on evaporator with 4.7 GHZ / 1.7 V (end of bios in stock asus P5B DLX :
) .
I hope You like that project
.
Thanks
Regards
Peter