Hello
I have some parts for sale ...
Mainly I have compressors for sale, all for 230V.
Danfoss SC18CL brand new compressors (fabric caps on pipes) with electric and rubber legs - all like from shop - have 2 pcs = price 160 eur/one
200 cm + 41 cm of DN12 naked Stainless flex hose = 20 eur
Suction lines from this unit (was working sth like 50 hours total) :
http://www.xtremesystems.org/forums/showthread.php?t=142426So CPU plus GPU evaps (GPU evap have flat bottom so won't work on cards where core is lower than IHS so 2900xt for example) (I'll give enclosures - for CPU and for GPU too , bolts, insulation for evaps etc) + 13mm thick insulation + sleeve + Kprobes x2 + captubes+ braided DN10 hoses inside sth like 110 cm long each one, all pressure tested -
price 120 eur for all ! Or 90 eur for CPU line and 40 eur for GPU line .I can also make custom and VERY cheap SS using blue chiller showed on down part of this page and this line(s) . will be all modded and fitted (HX box from chiller will be removed. ------------------
ROTARIES: All mentioned above are new, never used, only were mounted once in aircon units, which never came to shops (cases of A/C units was damaged in transport) , ALL are complete with rubber legs , cables and start capacitor . I'm not sure of exact power, mentioned BTUs are only mine shoot, based on varoius infos found in internet .
SHIPPING WORLDWIDE, please ask me about shipping price to Your country .
Sanyo remark C-1rn110h5a - around 12-13 k btu - have 1 pcs - 130 eur one
TECO KETC176elbc-a -
10755 BTU (sure) - used in one of mine units for 5 hours - 1 pcs -
85eur Waterchiller with rotary compressor - I want to sell this whole chiller unit but this is not working well only becasue of HX with too little pipes diameter - it's making lower than -20C unloaded but water can't flow via HX without restrictions. It's one of mine first builds . It's leak free, filled with R507. Condensor around 1.5 kW and fan 230V are used, painted, gauge is REFCO, it has Kprobe on end of HX. ROTARY compressor in this one is sanyo remark 6826 BTU .
Price 120 eur for whole chiller like showed on picture ! If anybody wants - I can mod this to plate HX, fill with R507 and that will be fully working chiller making around -10-15C liquid with HUGE load around 500w.
ASPERA T6215Z -used - it's 20.4 ccm, 5/8 HP HBP, orginally for 134a, with electric and capacitor, rubber legs, work with 404a/507 and other gases ...has fresh POE oil, looks and work like new - was changed and then pipes of compressor was closed by brazing to prevent oil from humidity = price 65 eur .
ALCO steel filters/driers- for sale all 3 together like on picutres,two for 3/8' flare pipe and one for 3/8' brazed, pipes comming out of driers were closed by factory= price 20 eur/ for 3 driers like on picture.
CONTACT : (please ask me about shipping costs to Your country)
Emails :
-piotrek_wis@poczta.onet.plor
-builtbypiotres@op.pl-PM on this forum
- MSN :
piotrek_wis@poczta.onet.pl-ICQ : 488589676
Thanks
Best Regards
Peter