This is VERY typical and quite boring, ordinary cascade - metal baseplate (welded frame), plate HX, R507/R1150, no gauges, 2x 13000 BTU,1HP compressors.
So simple, without bling-blings so it's not such expensive as cased cascades ..Specs :
compressors: Sanyo remark C-RN110H5A around 13000 BTU so 1HP on both stages
XVes: Danfoss TS2+ nozzle 01 / captube 0.9 mm
HX: plate HX , 12 plates
condenser: 3.0 Kw, alu-cu, cooled by 300mm/230V fan plus alu-cu 2x120mm desuperheater for 2nd stage
refrigerants : R507/R1150
oilseparator : Temprite 340 + Castell handvalve + Danfoss sightglass
safety : RANCO cut-off, 1.5 litre FACH expansion tank
case : baseplate with welded frame , black painted+ wheels
others: Anaconda shocks absorber on 1st stage's suction line and ...that's all
Frame made by my Father and his helper . That's a lot Dad
Only one suction line will be used here, other one is for another order
First frost on her pipes
. And VERY profi insulation from old cloth . I'm proud of it LOL .
Unloaded in first tests
on 260W dummyload.
1st stage when 2nd stage was cooling 260w .
2nd stage loaded pressures.
uuups mine profi insulation wasn't good enought
And some sha... , I mean leak tester foam .
Message édité par piotres le dimanche 24 août 2008 à 01:38:48