Cooling-Masters
Connexion · INSCRIPTION · Site Recevoir à nouveau l'e-mail de validation


piotres' suction lines, "fix evapo" ;-P

Ajouter ou retirer ce sujet de vos favoris  ·  Suivre ce sujet  ·  Imprimer ce sujet
Pages :  1  2  3 
Page précédente    Page suivante 
piotres


Membre
Messages : 369

jeudi 07 juin 2007 à 22:53:05     
Hi

I want to show You mine suction lines with evaps sets, some people have been asking me about it, so I decided to show You some ...YES, I make them for order ;-) .



Basicaly evap construction is like that on left ...but mine current design have 40 mm tall, and bit another canals inside ...on picture is mine rev 1.1 .



Brazed and polished evaporator .



Brazed suction line which has gone to KumKum's unit .



Enclosure .



Mine last suction line made, with K-probe attached, 13 mm insulation, 70 cm long for Peiponrang .



That's kit which I give to every suction line and evap set : stainless backplate, 19 mm and 6mm thick armaflex sheets, bolts set (80 mm long), some armaflex tape, 19 mm thick insulation for enclosure (no included on picture ) .

Feel free to sent me PM/e-mail with ask about suction line which You want ;-) (other colors of sleeves possible, braided lines, thicker insulation etc.) .

Regards
Peter




Google




     
xalis


Membre
Messages : 9791

jeudi 07 juin 2007 à 23:16:57     
not too bad
Trenton


Membre
Messages : 137

vendredi 08 juin 2007 à 06:52:42     
range price ?
bulledeaux


Membre
Messages : 145

vendredi 08 juin 2007 à 11:32:02     
Clemmaster


Benou lover <3
Messages : 5804

vendredi 08 juin 2007 à 14:02:17     
I've got 2 of them (are they the same as those you send to me?), relly simple to mount and braze
piotres


Membre
Messages : 369

vendredi 08 juin 2007 à 23:19:33     
QUOTE (Clemmaster @ vendredi 08 juin 2007 à 14:02:17) :

I've got 2 of them (are they the same as those you send to me?), relly simple to mount and braze

Yes, exactly same .

I'll be nice Clem, if You'll show in that topic some pictures of "mine" suction lines in use ;-) .

Thanks
Regards
Peter
Clemmaster


Benou lover <3
Messages : 5804

vendredi 08 juin 2007 à 23:25:26     
Sure I will, I just have some issues to solve with it (bad contact or bad probe ) but I've another system to build with it too and I'll show some pics of course
quent


Membre
Messages : 2384

vendredi 08 juin 2007 à 23:38:43     
I've got one too, doing great job
piotres


Membre
Messages : 369

dimanche 10 juin 2007 à 22:15:02     


SLI evap on the right .



Braided lines .



Kit for dual evap unit CPU + GPU or SLI/CF (CPU evap can be used with GPU enclosure, it's changed easy ) .



One of Clemmaster's kit .

Regards
Peter
piotres


Membre
Messages : 369

vendredi 29 juin 2007 à 21:35:00     
Hi

One more, braided :





Thanks
Peter
KzR


Modérateur Trancheur
Messages : 11562

samedi 30 juin 2007 à 00:53:41     
OMG so lovely
piotres


Membre
Messages : 369

mercredi 21 novembre 2007 à 00:13:46     
New Suction line for phase in Lian-Li V2000 . Quite short, braided hose, steeper evap, without Kprobe and sleeve as customer don't want it .











Enclosure will arrive soon .

piotres


Membre
Messages : 369

vendredi 23 novembre 2007 à 23:45:47     
Hello

GPU suction lines, 18 mm thick insulation, light red sleeves, 120 cm long .















With Kindest Regards
Peter

Message édité par piotres le vendredi 23 novembre 2007 à 23:46:16
piotres


Membre
Messages : 369

lundi 24 décembre 2007 à 14:43:59     
Hello

That's some of next lines - one CPU and two GPU lines - without insulation because client will do it by himself .

Evaporators are steepers, 42 mm diam.

Flex hose is 10mm ID, braided .

Pics :



CPU evap, GPU is almost same, but shorter .

















Regards

http://www.paperboy.nl/?PID1=9%3CE%3A%26A%...%25%40%20%20%0A

Peter
Clemmaster


Benou lover <3
Messages : 5804

lundi 24 décembre 2007 à 15:43:51     
The base is so nice like on those I got from you

Keep up the good work dude
moyen_moins


aka metalazzo | Anti²Bug
Messages : 10180

lundi 24 décembre 2007 à 18:07:10     
very good work piotres
piotres


Membre
Messages : 369

vendredi 07 mars 2008 à 23:27:17     
Hello

Suction line for GPUs, 110 cm long braided DN10 stainless flex lines, 265 cm of 0.8 mm captube, 18 mm thick insulation, orange sleevings, K-probes, stainless mountings + backplates .

I hope You like them .



Some seconds after taking burner away .. .













Full mounting kit togher with insulation and bolts set .


and .....


2 suction lines with CPU evaps , in both I've used braided DN10 flex hoses, 18 mm thick insulation, suction line sleeve, one line is with Kprobe and second without :







-----------------------









Thanks
Best Regards
Peter
Clemmaster


Benou lover <3
Messages : 5804

vendredi 07 mars 2008 à 23:31:45     
Nice as always

Did you get the new Kprobes?
piotres


Membre
Messages : 369

samedi 08 mars 2008 à 00:06:41     
Sure, that one mounted to Your line is from fresh supply .
Le_Lorenzo


Membre
Messages : 19

samedi 08 mars 2008 à 14:34:40     
Wonderful
piotres


Membre
Messages : 369

vendredi 14 mars 2008 à 00:34:59     
Hi

2 more sets .

1. CPU suction lines set for two independent single-stages, each flex line braided and 140 cm long, 18 mm thick insulation, Kprobes, red sleeve, DIXELLs XR10CX as a temperature dispays to each line .





Together with GPU suction lines : .



Dixell's test .














2. GPU suction lines set for SLI/CF unit , each flex line braided and 120 cm long, 18 mm thick insulation, Kprobes, red sleeve .... .






Together with CPU suction lines .








Thanks
Best Regards
Peter
cornerjack


Membre
Messages : 163

vendredi 14 mars 2008 à 12:46:29     
And my godets... ? lol
piotres


Membre
Messages : 369

samedi 15 mars 2008 à 00:42:23     
Wait a bit , all in proper time .
moyen_moins


aka metalazzo | Anti²Bug
Messages : 10180

samedi 15 mars 2008 à 13:41:46     
Very clean job piotres, as always
piotres


Membre
Messages : 369

vendredi 04 avril 2008 à 23:29:20     
Hello

3 new

2x GPU suction lines - 150 cm long flex hose braided, 18 mm thick insulation, captube 0.9 mm, K Probe .

1x CPU suction line - 120 cm long flex hose braided, 18 mm thick insulation, captube 0.9 mm, K Probe .





















I just want to say that in real that black places aren't visible from under green sleeve on CPU line, I don't know what is it on photo ? strange effect .







Thanks
Best Regards
Peter
Google




     
Pages :  1  2  3 
Page précédente    Page suivante