NEW Single-stage temperature record by piotres : -93.1*

Hi

That's SS for one nice guy from this forum - Pepinorang ...first He had planned to buy Mach2/Vapo LS, later plan to order 1/3 HP SS from one builder in France and ...finally 3/4 HP (9000 BTU) SS with CPEV from me .

That's first time I've mounted CPEV near evaporator (CPEV outlet is connected by 10 cm, 5 mm OD pipe with evap). In that way CPEV works much better, reaction for tunning is much faster and pulldown time too .

No case, only metal baseplate, my customer said that He'll make case from plexi by himself .
Freezepack controller (by GSMaster) and suction pressure gauge, are extras which customer really wanted .

Unit beat mine "old" record with single (-88.1*C) - it has made -93.1*C .

Specs :

Compressor: Sanyo C-1RV137H11AA
evap: steeper by piotres
XV: CPEV Fach "PZ" mounted near evaporator head
condenser: 2 row, alu-cu, cooled by 4*120 mm NBM 12V fans
Refrigerant : R507/R410a blend
Baseplate : 49 x 35 cm zincked plate baseplate
others: REFCO low side gauge, FreezePack controller (by GSMaster)



Suction line together with polish CPEV .



When freezeControler arrived .











First run ...and fighting for the COLDEST temperatures on evap (completelly closed CPEV) . RESULT : -93.1*C (that's now not WR , becasue Symphy has beat me with -94.4*C but with single-stage 2.5 HP build by me ) .



On 223W dummyload.



On 202W dummyload.



On 115W dummyload. As you can see -54*C in freezer's limit . Eg. real -54 = -54 on LCD, but eg. -60 real = still -54 on LCD, -65 real = -54 LCD etc. .















Some tests on Conroe E6700es ..4+ Ghz/1.6V = lower that -60*C on evap in full stress .



and finally well packed .

Happy benching Pepinorang .

Regards
Peter

Your job seems awesome, one more time
We're bored, each time it's the same quality... no suprises

Beautiful work once more

nice unit again Piotres , great work

-55 / +125°C IC limitation , that's so dumb

One more time : What's the use of getting -93° , CPEV totaly closed? I think we all know that rotary are very strong in vaccum . And the new record seem "normal" (for you) as you used a blend of R410A / R507c (the old record was done with R507 only as I remember)

Anyway the results are very good, once loaded

you have PM

Hi guys, in the end of the month i will post some pics with a new inox case made by me and some results with a QX6700 step 7 b3 and one step 4 b0 ES...

Hi guys,

This unit have 3 WR in his possession and soon 1 more also it is now in sell as you can see here : [VDS]Dod by Piotres -93,1°/-54° sur QX6800@5G/1,81v

Bye
p€p|n0r@ng