Cooling-Masters
Connexion · INSCRIPTION · Site Recevoir à nouveau l'e-mail de validation


BIG parts sale (rotaries,Dixell,Eliwell,Danfoss,VapoLS)

Ajouter ou retirer ce sujet de vos favoris  ·  Suivre ce sujet  ·  Imprimer ce sujet
Page précédente    Page suivante 
piotres


Membre
Messages : 369

mercredi 12 août 2009 à 23:05:39     
Hi

First of all sorry that photos have that on photos You can see that stupid piece of paper with "piotres@xs" I make advertisement also on xs forum and there it's must, I only have one version of photos.

ROTARIES: All mentioned above are new, never used, only were mounted once in aircon units, which never came to shops (cases of A/C units was damaged in transport) , ALL are complete with rubber legs , cables and start capacitor . I'm not sure of exact power, mentioned BTUs are only mine shoot, based on varoius infos found in internet .


SHIPPING WORLDWIDE, please ask me about shipping price to Your country .






LG 164PAB - around 10000 BTU - have 2 pcs for sale - 100 eur/one, 180 eur if You buy two.



LG 164PN12B - around 10000 BTU - have 1 pcs for sale - 110 eur/one



TECO KET176ELBC-A - 10755BTU (checked on Teco's website) - have 1 pcs for sale - 100 eur/one



Sanyo (remarked) C-RN75H5A - around 8000 BTU - have 2 pcs for sale - 85eur/one, or 150 eur if You take both.



Tiny Samsung CD124Q-L1Z2XG1 (R134a) compressor - unmounted from brand new 57l frigde . Pipes braze shut, OIL in perfect condition. Price 30 eur.



3 pcs of Danfoss TES2 valves + 1 pcs of Danfoss TS2 valve . All are used . good condition, with nozzles and nuts (have orifice 0X,00,03 and 06 nozzles) - price 20 eur/one kit , or 60 eur if You take all 4 valves.



Dixell XR20CX 230V - brand new, with manual and box . Without probe . Price 50 eur, have NTC probe OEM Dixell for 10 eur ( want to sell probe only with controller) .



Eliwell ID971 230V controller - used , in perfect condition. Without probe . Price 28 eur.




Danfoss Eliminator filter 1/4' flare - brand new, caps never removed . Price 10 eur .




ALCO steel filters/driers- for sale all 3 together like on picutres,two for 3/8' flare pipe and one for 3/8' brazed, pipes comming out of driers were closed by factory= price 20 eur/ for 3 driers like on picture.






Waterchiller with rotary compressor - I want to sell this whole chiller unit but this is not working well only becasue of HX with too little pipes diameter - it's making lower than -20C unloaded but water can't flow via HX without restrictions. It's one of mine first builds . Now I don't have time to test it again
It's leak free, filled with R507. Condensor around 1.5 kW and fan 230V are used, painted, gauge is REFCO, it has Kprobe on end of HX. ROTARY compressor in this one is sanyo remark 6826 BTU - price only for compressor from this unit = 80 eur .Price 120 eur for whole chiller like showed on picture ! If anybody wants - I can mod this to plate HX, fill with R507 and that will be fully working chiller making around -10-15C liquid with HUGE load around 500w.


One Danfoss EKC 201C controllers , used but in mint condition (model :084B7068) :

PDF : http://us.refrignet.danfoss.com/TechnicalI...01/rs8ds102.pdf





comes with mounting clips (only) . Price for this one 35 eur.

---------
Vapochill LS with Silver Lian-li case, which is fitted for this LS, it's orginal case which was bought as a kit with Vapochill. Vapochill is a version which has inside PSU, I think it's Topower around 400W. Or Course I can unmount that PSU . Currently vapochill is 100% stock, but it has broken FR 8.5CL orginal compressor inside (working , but it's very loud) . I offer mod like changing compressor in this Vapochill, mount desuperheater or maybe bigger condensor or two 120mm fans, and filling with R507 + tunning for load around 220W. Or course I can change also suction line for longer one or change evaporator for steeper custom, with enclosure for S775. . Now vapo has orginal S478 mounting kit (it's can be modded to S775 too) .

It has no scrathes on case .

Control unit is working, temperature is displayed .

Prices - for KIT with cases for PC :
As it's - with broken compressor FR 8.5 CL = 280 eur (!!)

Modded to eg. Aspera NE2134GK 12 ccm 1/2 HP compressor brand new (stronger than nl11f and almost same silent), filling and tunning used R507, can remove PSU from inside etc = 500 eur

I can make any other mods or it as I've already said ...

Packing or unit for shipping will be good .

Shipping costs : please ask on PM or email about it (I need postal code and country to know price ) .












CONTACT : (please ask me about shipping costs to Your country)

Emails :

piotrek_wis@poczta.onet.pl

or

piotres@boo.pl

-PM on this forum


Thanks
Best Regards
Peter

Message édité par piotres le dimanche 15 novembre 2009 à 23:34:48
Google




     
piotres


Membre
Messages : 369

vendredi 14 août 2009 à 08:13:00     



I have also Maneurop MTZ40 (404a/507), 400V, made in france , 2006 year, used total for 5 hours in big cooling chamber but then was changed because it wasn't proper for that setup . Sticker was washed using benzine why it's looking like that.

Price 180 eur.

piotres


Membre
Messages : 369

mardi 18 août 2009 à 08:34:29     
Eliwell ID971 230V controller - SOLD
Clemmaster


Benou lover <3
Messages : 5804

lundi 24 août 2009 à 17:05:44     
I take the GPU line and some extra stuff
piotres


Membre
Messages : 369

mardi 25 août 2009 à 00:51:18     
Please sent me PM what extra stuff You exactly want .
piotres


Membre
Messages : 369

jeudi 27 août 2009 à 22:58:55     
GPU suction line - SOLD
piotres


Membre
Messages : 369

samedi 29 août 2009 à 00:25:16     
empty

Message édité par piotres le dimanche 15 novembre 2009 à 23:32:50
OrOoX


AFK ? Késako ? :D
Messages : 8605

samedi 29 août 2009 à 08:58:45     
Whoua ! Nice Job
piotres


Membre
Messages : 369

mardi 29 septembre 2009 à 07:43:25     
This is correct for sale topic BUMP
piotres


Membre
Messages : 369

mercredi 07 octobre 2009 à 09:03:48     
sold

Message édité par piotres le dimanche 15 novembre 2009 à 23:33:14
piotres


Membre
Messages : 369

jeudi 29 octobre 2009 à 20:23:19     
BUMP

Dixell XR20CX and Dixell XR20C are no longer avalible for sale .

Regards
piotres


Membre
Messages : 369

dimanche 15 novembre 2009 à 01:02:32     
BUMP for all compressors and danfoss TS2 !

Regards
Peter
patrick076


Membre
Messages : 1

mardi 27 avril 2010 à 07:32:48     
il semble très pleine puissance destructrice et la bombe, mais la technologie de Nice
perecastor


Modérateur-faker/Portuguais des iles/父 亲河&a
Messages : 15091

mardi 27 avril 2010 à 10:15:29     
Piotres, you should change your image hoster....

Many pictures are blocked @ my work
kissagogo27


Méchant Vieux Râleur
Messages : 27006

mardi 27 avril 2010 à 11:00:37     
wé j'ai eu pleins de messages d'avertissement de chrome ( malware etc )
Google




     
Page précédente    Page suivante