Cooling-Masters
Connexion · INSCRIPTION · Site Recevoir à nouveau l'e-mail de validation


Chief(tec) NL11F SS (big tower)

Ajouter ou retirer ce sujet de vos favoris  ·  Suivre ce sujet  ·  Imprimer ce sujet
Page précédente    Page suivante 
piotres


Membre
Messages : 369

samedi 13 septembre 2008 à 01:32:23     
Hello

Today I want to show You worklog of sth less boring than rest of mine units : SS NL11F using Deluxe 0.5kW condensor, all closed in brand-new Chieftec Big Tower case .

Specs :

Compressor: Danfoss NL11F
Evap: steeper 42mm diameter, braided DN10 suction flex hose
XV: captube 0.9 mm
Condensor: cold-ice custom "deluxe" 0.5kW with riffled tubes
Refrigerant : R507
Case : Chiftec Big Tower (brand new)
Others: Scythe Ultra Kaze fans, fan controller, blue temperature display, PC autostart module


Work till now :





Temperature display, thermostat to start PC automatic , and fan controller - all delivered by future owner of this ... case .



Also Scythe Ultra Kaze 120x38 mm HIGH flow fans ...













Now case will be limited only for one 5.25' bay ...some big reduction LOL .





I must move PSU higher to fit all in case ..specially when owner plan to use 164 mm long 650W PSU .











5.25' panel for controller - I must use old silver 5.25' mask, becasue orginal from Chieftec was not flat .


All till now ... .

Regards
Peter
Google




     
piotres


Membre
Messages : 369

mercredi 01 octobre 2008 à 22:30:30     


Hi

Chieftec is already fnished, pictures :









Suction line is another than always , and it have probe for custom thermostat .













Cuting new panel for controller (owner said that old silver one looks very not good with gray case) - few pics later You'll see from where I've picked those plate. Nevertheless - owner said that quality of this new panel is creep . heh so I'm very bad modder .







First frost inside case.









Power consumption with no load and loaded with 260W.











Final unloaded and loaded with 260W.









If not that hole in side wall case would look like normal "office computer" case ...who thinks that inside is cooler making -50C :huh:? That's why I like this project.



Should be rather "powered by piotres" .





Regards
Peter

Message édité par piotres le mercredi 01 octobre 2008 à 22:31:03
Rosco


Administrateur
Messages : 25914

mercredi 01 octobre 2008 à 22:42:37     
What's the purpose of the second big filter drier on the succion line ? To get more volume ?
piotres


Membre
Messages : 369

mercredi 01 octobre 2008 à 22:54:31     
2nd filter is only empty cooper shell, it's suction line accumulator.

I forgot to mention that this ugly hole in side wall will be cutted bigger and filled with plexi or alu mesh by owner .

Also thermostat needs tuning as it can be seen on photo .

Regards
Peter
tanguintel


Membre
Messages : 64

lundi 06 octobre 2008 à 14:18:58     
Why have you isolated valves Shrader????????
piotres


Membre
Messages : 369

lundi 06 octobre 2008 à 16:37:11     
QUOTE (tanguintel @ lundi 06 octobre 2008 à 14:18:58) :

Why have you isolated valves Shrader????????

I seal every shrader with some silicone too (one time mine unit have had tiny leak on shrader) since that time I apply some silicone sealant on cap . and then wrap it with some armaflex tape .
piotres


Membre
Messages : 369

mardi 07 octobre 2008 à 22:29:20     
movie : http://pl.youtube.com/watch?v=kNdN2qgO1RI
Rosco


Administrateur
Messages : 25914

mardi 07 octobre 2008 à 22:51:09     
Too much noise for me
perecastor


Modérateur-faker/Portuguais des iles/父 亲河&a
Messages : 15091

mardi 07 octobre 2008 à 23:41:28     
+1
kissagogo27


Méchant Vieux Râleur
Messages : 27497

mercredi 08 octobre 2008 à 00:27:35     
where can we put the hoover bag ?
piotres


Membre
Messages : 369

mercredi 08 octobre 2008 à 23:09:34     
I forgot to mention that on move all fans were set on MAX speed that's why cooler is such loud there (unit have fan speed controller as I've already mentioned) . NL11F is noiseless compared to 120x38 mm Ultra Kazes on max speed :-O . I know on movie it sounds like loudly hoover but in real even on max speed of fans it's more silent .

Regards
Thanks for all comments
Peter
Google




     
Page précédente    Page suivante