Hello
This is VERY typical and quite boring, ordinary cascade - metal baseplate (welded frame), plate HX, R507/R1150, no gauges, 2x 13000 BTU,1HP compressors.
So simple, without bling-blings so it's not such expensive as cased cascades ..
Specs :compressors:
Sanyo remark C-RN110H5A around 13000 BTU so 1HP on both stagesevap:
steeper XVes:
Danfoss TS2+ nozzle 01 / captube 0.9 mmHX:
plate HX , 12 platescondenser:
3.0 Kw, alu-cu, cooled by 300mm/230V fan plus alu-cu 2x120mm desuperheater for 2nd stagerefrigerants :
R507/R1150oilseparator :
Temprite 340 + Castell handvalve + Danfoss sightglasssafety :
RANCO cut-off, 1.5 litre FACH expansion tankcase :
baseplate with welded frame , black painted+ wheelsothers:
Anaconda shocks absorber on 1st stage's suction line and ...that's all Frame made by my Father and his helper . That's a lot Dad
.
Only one suction line will be used here, other one is for another order
.
First frost on her pipes
. And VERY profi insulation from old cloth . I'm proud of it LOL .
Unloaded in first tests
.
on 260W dummyload.
1st stage when 2nd stage was cooling 260w .
2nd stage loaded pressures.
uuups mine profi insulation wasn't good enought
And some sha... , I mean leak tester foam .
Thanks
Best Regards
Peter
Message édité par piotres le dimanche 24 août 2008 à 01:38:48