Hello
I have compressors for sale, all for 230V.
ROTARIES: All mentioned above are new, never used, only were mounted once in aircon units, which never came to shops (cases of A/C units was damaged in transport) , ALL are complete with rubber legs , cables and start capacitor . I'm not sure of exact power, mentioned BTUs are only mine shoot, based on varoius infos found in internet .
Prices per one compressor.
SHIPPING WORLDWIDE, please ask me about shipping price to Your country .
Sanyo remark C-1rn110h5a - around 12-13 k btu - have 3 pcs - 130 eur one
LG Nk185PAD - around 10000 BTU - have 2 pcs - 110 eur
TECO KETC176elbc-a - 10755 BTU (sure) - 1 pcs - 105 eur
TOSHIBA PG165x1c-4dfde2 - 1 pcs - around 10000 BTU - 1 pcs - 115 eur
Daikin yzg-22ry1t1 - 1 pcs - 7000 BTU - was used for sometime in mine SLI unit - 80 eur
Waterchiller with rotary compressor - I want to sell this whole chiller unit but this is not working well only becasue of HX with too little pipes diameter - it's making lower than -20C unloaded but water can't flow via HX without restrictions. It's one of mine first builds . It's leak free, filled with R507. Condensor around 1.5 kW and fan 230V are used, painted, gauge is REFCO, it has Kprobe on end of HX.
ROTARY compressor in this one is sanyo remark 6826 BTU .Price 120 eur for whole chiller like showed on picture ! If anybody wants - I can mod this to plate HX, fill with R507 and that will be fully working chiller making around -10-15C liquid with HUGE load around 500w. HERMETIC compressors and other parts :ASPERA T6215Z -used - it's 20.4 ccm, 5/8 HP HBP, orginally for 134a, with electric and capacitor, rubber legs, work with 404a/507 and other gases ...has fresh POE oil, looks and work like new - was changed and then pipes of compressor was closed by brazing to prevent oil from humidity = price 65 eur .
UNIDAD HERMETICA GL90TB -used - it's 9 ccm, 1/3 HP LBP, orginally for 134a, with electric and capacitor, rubber legs, work with 404a/507 and other gases, pipes of compressor was closed by brazing to prevent oil from humidity, worked and looked fine = price 45 eur .
Danfoss FR 8.5G -used - it's 8.5 ccm, 1/4 HP LBP ,complete LST starter (type without capacitor), orginally for 134a,rubber legs, work with 404a/507 and other gases, pipes of compressor was closed by brazing to prevent oil from humidity, worked and looked fine = price 45 eur .
Danfoss NL11F -BRAND NEW in box- it's 11 ccm, 1/3 HP LBP ,complete brand new LST starter in bag (type without capacitor) , orginally for 134a, work with 404a/507 and other gases, pipes comming out of compressor were closed by FACTORY, those seals were not damaged and never removed = price 90 eur .
TEMPRITE 340 oil separators - BRAND NEW- without float (needs valve on oilback line), never used, 1/4' pipes brazed ports, don't need to be prefilled with oil, pipes comming out of separators were closed by FACTORY, those seals were not damaged and never removed =
price 25 eur/one, I have 10 pcs for sale .
ALCO steel filters/driers- for sale all 3 together like on picutres,two for 3/8' flare pipe and one for 3/8' brazed, pipes comming out of driers were closed by factory=
price 20 eur/ for 3 driers like on picture.CONTACT : (please ask me about shipping costs to Your country)
Emails :
-piotrek_wis@poczta.onet.pl
or
-builtbypiotres@op.pl
-PM on this forum
- MSN : piotrek_wis@poczta.onet.pl
-ICQ : 488589676
Thanks
Best Regards
Peter