Hi
It's simple dual evaporator unit, using one rotary compressor, and captubes as a expansion valves. No heat-exchangers
. It has been made for some OC sesions (which are planned for future)
.
I've used one "CPU" evaporator + one "GPU" evaporator, to make possible using it on SLI configurations or as a CPU+GPU cooler (just by swap enclosure on "CPU" evap) .
SPECS :
compressor:
Daikin YZG-22RY1T1 (rotary)evaps :
piotres's custom CPU + custom made GPU evaps expansion valves:
2* 0.8 mm captubescondenser:
2 row, alu-cu, cooled by 2* Sanyo 120mm fan + 2* NBM 120mm, all 4 for 12Vrefrigerant:
R410a & R507 blendbase:
MDF 40 x 30 cm, painted matt blackothers:
High side gauge mounted on condensor's topBraided suction lines, both around 100 cm long
.
Suction sleeve with white stripe - I like it very much
.
1st run ...sorry for not nice looking old insulation on suction accumulator
.
No load final temperatures .
CPU evap = 225W / GPU evap = 200W / Sum =
425 W Around
-33*C on both evaporators .
High side pressure with final charge during no load.
System is for sale
. Sent me PM/e-mail if You're interested .
Regards
Peter
Message édité par piotres le samedi 28 avril 2007 à 23:38:21