3/4HP rotary410a -55C loaded/can be dual or triple evap

Hi



Topic about unit :

http://www.xtremesystems.org/forums/showthread.php?t=95962

Unit has full mounting kit for ALL CPU (Conroe, AMD 64, older sockets too) and for ALL Graphic cards - except 7950GX2 ;-) (7900GTX, X1950XTX), all bolts, insulation, backplates are included, unit is ready for using !! Unit can be used 24/7 .

In current specification unit is able to work with -55-60*C evaporator temperature on CPU like eg. AMD 64 @ 3200 Mhz/1.8V, on Conroe should be even some degreses less (I think around -60*C), on high-end GPU like X1900XTX should be around -55*C too.

When evap is without load, temps like -70-75*C are very easy to reach . Best temperature made by this unit is -88.1*C .

I can also rebuild this unit ..eg. add second evaporator for GPU (+140 eur), or even rebuild this unit to 3-head system (CPU evaporator + 2 small SLI/CF evaps) (+210 eur). I can also build custom system for You ..eg. Danfoss NL11F + small metal case,monsterous rotary unit with 3 head, or ethylene 2-stage cascade etc. just sent me mail with ask ;-)) .

PRICE : 430 eur + shipping

Please ask me about shipping cost .

Contact : piotrek_wis@poczta.onet.pl

MSN : piotrek_wis@poczta.onet.pl

Regards
Peter

huum i've tried your link but doesn't match

i think isn't complete

You should avoid writing your email/MSN directly. Ask for a PM instead of that (you'll receive an email if asked, see your profile options), it's more secure to avoid spambot.

sorry, now that's correct link : http://www.xtremesystems.org/forums/showthread.php?t=95962

Thx for tip Rosco

hum le R507 ça correspond à quoi comme gaz ?

Pas trop entendu parlé à vrai dire....

à du R507... c'est un vrai gaz, distribué en France, rien de bien exotique, question performance, c'est dans ce qui se fait de mieux, dans la gamme des 404/402

C'est kif-kif (un pouillème mieux) à du R404a, c'est le gaz utilisé ds un LS par exemple.

AZ-50=R507

ok merci

up

http://www.xtremesystems.org/forums/showthread.php?t=95962

Link in first post can be wrong, that should be OK

Up UP

Use the edit button to correct it =>

Thx Rosco, edited

PRICE DROP : 420 EUR

I really want to sell that

up

Make me an offers , Guys !

I can exchange that for hardware like Conroe E6300-E6600 , conroe mobo, DDR2 2x512 mb, GPU like X1800-X1950 or + GF 7800 (2* 7800GTX will be very nice) , price negociable .

Peter

Hello,
I may be interested in..

3/4HP is very powerfull, i know that..what about noise (can you compare it to something else, like a mach II CP noise maybe) ?
thanks,

Mach 2 has the most silent compressor - Danfoss NL11F

Rotary compressors are generally loudly (louder that every heremtic compressor) .

So - this unit is much more loudly than Mach 2 .

But ...YES it's POWERFUL ...It's 9000-9500 BTU compressor so I can say it's near 1HP (1HP = 10000 BTU) .

I can transform it to dual/triple evap, as first post say .

Regards
Peter

I am very interested
I have a Asus X1900XTX and E6600 or E6700...

You got e-mail cornerjack

pending

Yes, it's for me

sold to Cornerjack

Juste pour dire que j'ai reçu mon matos de Piotres et que tout est parfait
Donc, vous pouvez lui faire confiance les yeux fermés !



Pas encore allumé le système, je le laisse se reposer un peu de ce long voyage...

J'en connait un qui va s'amusé

Oui, j'ai bon espoir et ma seconde 8800GTX vient d'arriver aussi